ID: 20117
16 Oct 2024
~
Загрузок
~
Лайков
~
Просмотров
~
Элементов
Дождитесь загрузки BDE для получения команды
Получить команду
Для Командного Блока или Axiom мода
Открыть в BDEngine Пожаловаться
St_Denis
Автор
Описание

This is the best tank of France in 2024. It was named after a French marshal and was firstly produced in 1991.

Модель содержит
polished blackstone brick slab: 7
chiseled polished blackstone: 6
polished blackstone brick stairs: 16
spruce button: 10
warped slab: 24
spruce slab: 8
gray concrete: 4
green terracotta: 36
gray terracotta: 5
terracotta: 1
spruce stairs: 10
warped stairs: 8
cyan terracotta: 3
brown terracotta: 2
dark oak fence: 3
dark oak trapdoor: 6
stone button: 6
daylight detector: 5
brown candle: 3
oak trapdoor: 4
polished blackstone button: 4
iron bars: 6
dark oak fence gate: 2
Как переместить или повернуть модель?

Используйте окно редактора выше, чтобы повернуть или переместить модель так, как вам нужно, а затем нажмите кнопку Получить команду, чтобы получить новую команду.
Если вы хотите внести больше изменений или полностью переделать модель, откройте полную версию редактора с помощью кнопки Открыть в BDEngine.

Как использовать?

Через командные блоки:

Чтобы использовать команду в игре, вам нужен Командный Блок, так как поле чата в Minecraft имеет ограничение по количеству символов.

      1. Open the chat on the "/" button and paste this command into it:
/give @p command_block
      2. Place the Command Block in the desired location.
      3. Right-click on the Command Block and specify in the Console Command field - this model's command, which you can copy by clicking on Get the command.
      4. Change Need Redstone to Always Active.
      5. Press Done.

Теперь вы можете сломать Командный Блок и насладиться установленной моделью. Повторите процедуру несколько раз, если в окне экспорта есть несколько команд модели.

Через Axiom мод:

Обязательно установите Axiom [modrinth], если вы этого еще не сделали.

      1. Click Get the command, select Command format: Axiom and copy the command.
      2. Open the desired world in the game.
      3. Use ctrl + V to insert a model into the world.
      4. Click on the small white cube, next to the model, to move and rotate it.

Так же от St_Denis

Из той же категории

Sign up to create and share content. Registration